It’s one of the first questions people ask me, and it’s easy to get wrong in both directions. Order too little and the job stalls halfway. Order too much and you’ve got a pile in the driveway with nowhere to go. The math is simple once you see it.
The formula
Fill dirt is sold by the cubic yard. To work out how many you need:
- Measure the length and width of the area in feet.
- Estimate the average depth in feet. (Inches divided by 12. Four inches is about 0.33 feet.)
- Multiply length × width × depth to get cubic feet.
- Divide by 27 to get cubic yards.
A worked example
Say you’ve got a low spot that’s 20 feet by 30 feet and averages about 4 inches deep.
- 20 × 30 = 600 square feet
- 600 × 0.33 feet = about 200 cubic feet
- 200 ÷ 27 = about 7.5 cubic yards
Low spots are rarely the same depth all the way across, so take a few measurements and use a rough average. A board laid across the low area and a tape measure work fine.
Allow a little extra
Loose fill settles once it’s spread, packed and rained on. Plan on ordering a bit more than the number on paper so you aren’t short at the end, especially for anything that needs to finish level, like a pad for a shed.
Fill dirt or topsoil?
They aren’t the same thing, and the difference matters.
- Fill dirt is the soil from below the surface, often sandy around here. It’s for building up and leveling: low spots, holes, along a foundation, under a pad. It packs well but doesn’t grow much.
- Topsoil is the top layer, with more organic matter in it. It’s what grass and plants want to grow in.
For a low spot in the lawn, a common approach is fill for the bulk of the depth with a layer of topsoil on top before sod or seed.
Or skip the math
If you’d rather not measure, send me a photo of the area with a rough idea of the size, and I’ll work it out for you. I can spread a pile you’ve already had delivered, or haul smaller loads in myself. See fill dirt & low spots for more.